Philips MAGNAVOX AZ 1200 Owner's Manual page 10

CD PLAYER
Playing a CD
1
Set the POWER control to CD.
2 Press A OPEN to open the CD compartment.
3 Insert an audio CD (printed side up) and close the CD
compartment.
The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the PLAY-PAUSE 1>DD button to start CD play.
Display indication: the current track number.
5 Press the STOP □ button to stop CD play.
Display indication: the total number of tracks.
You can interrupt CD play by pressing PLAY-PAUSE >00. Continue
CD play by pressing the button again.
Display indication: the current track number flashes.
Note: CD play will also stop if:
- you open the CD compartment
-
the end of the CD is reached, or
"
you move the
POWER
control
to TUNER or TAPE.
If you make a mistake when operating the CD player, or if the
CD player cannot read the CD, the display shows
E or
no. (See
"TROUBLESHOOTING".)
If you press PLAY-PAUSE >00 and there is no CD inserted, the
display shows no.
Environmental information
All redundant packing material has been omitted. We have tried to make the packaging easy to
separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your set consists of materials which can be recycled if disassembled by a specialized company
Please observe the local regulations regarding the disposal of packing materials, dead batteries
and old equipment
_
10