Table of Contents
Advertisement
Fault
The laundry is too
damp.
Cause and troubleshooting
Check whether the lighting in your room or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 22.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
→ "Changing the dryness level", Page 21.
▶
Drying target not adjusted.
→ "Adjusting the dryness level", Page 21.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 22
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 35.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 29.
1.
→ "Inserting the condensation container", Page 30.
2.
→ "Starting the programme", Page 26.
3.
Troubleshooting en
39
Advertisement
Table of Contents
