Bosch WTB86228ID User Manual And Installation Instructions page 37

Fault
Creasing.
and programme ter-
minated.
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The programme does
not start.
Cause and troubleshooting
Unsuitable programme for the type of fabric.
Set the suitable programme for the type of fabric.
▶
→ "Programmes", Page 22
Easy-Care fabrics are dried for too long.
→ "Changing the dryness level", Page 21.
▶
→ "Adjusting the dryness level", Page 21.
▶
Crease-reduction function not activated.
Activate the crease-reduction function.
▶
→ "Buttons", Page 19
Condensation tank filled.
→ "Emptying the condensation container", Page 29.
1.
→ "Inserting the condensation container", Page 30.
2.
→ "Starting the programme", Page 26.
3.
Water drain hose is caught or jammed.
Ensure that the water drain hose is not kinked or
1.
trapped.
Route the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
Water drain hose is blocked.
Rinse the water drain hose with tap water.
▶
Foreign object is located in the base unit
→ "Opening the base unit", Page 32.
1.
Remove the foreign objects that are present.
2.
→ "Closing the base unit", Page 34.
3.
The remaining volume of condensation may remain in
the condensation container.
Not a fault – no action required.
▶
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
Childproof lock is activated.
Deactivate childproof lock.
▶
→ "Deactivating the childproof lock", Page 30
Start/Pause
Press Start/Pause
▶
No programme set.
→ "Setting a programme", Page 26.
1.
has not been pressed.
.
Troubleshooting en
37