Yamaha PASC4 Owner's Manual page 65

Bluetooth
indicator
Ready for pairing
Paired
Communication with Bluetooth low energy
technology
The wireless communication device corresponding to the
CSCP, CPP, or YEP1.0 profiles can provide the communi-
cation via Bluetooth low energy technology.
1. Set the profiles of the Display Unit by referring to the
In addition, check that such settings comply with the
connection settings of the wireless communication de-
vice that you use or the application.
2. Check that the Bluetooth indicator is displayed.
3.
ting the Bluetooth low energy technology of the wire-
less communication device or the application. For more
information, see the instruction manual of the wireless
communication device or the application.
*
meric characters.
4. Make sure that the Bluetooth indicator displays suc-
cessful pairing.
TIP
Keep the distance between the display and wireless
communication device within 3 ft (1 m). The maximum
communication distance of this wireless communica-
tion device is 3 ft (1 m).
If the wireless communication device is kept in a bag,
etc., the actual communication distance might be short-
er.
Do not use the wireless communication device in plac-
es with magnetic fields, static electricity, or electromag-
netic interference.
If the wireless communication device is used near
transmitters, broadcasting stations or the following type
of equipment, wireless communication may not be pos-
sible.
Microwave ovens
Digital cordless phones
Wireless communication devices
Near other wireless communication device using the
2.4 GHz band.
Do not cover the display with objects such as aluminum
sheets that block the radio waves. Otherwise, wireless
communication may not be possible.
For the output power level of each profile, see the
Note that if pairing of the Display Unit and application is
correctly established, the display might automatically
change to the display layout for the application.
61
-
-