Go Shooting In Real Time.28 - Canon SURE SHOT 105 ZOOM S Instructions Manual

Shooting in Real Time
Use this mode when you want
to take pictures in real time.
Usually when you take
pictures, there is a very short
delay between the shutter
button being pressed and the
shutter releasing. In
CO
mode,
press the shutter button down
halfway to focus on the
subject and then push the
button down fully to take a
picture in real time.
Turn the dial to CO.
■ Position the AF frame over your
subject and press the shutter button
down halfway
^ There is a brief zooming sound as
the camera focuses on the
subject
• Keep the shutter button pressed
halfway down
* When you are ready to take the
picture, press the shutter button
down fully
O
* If you press the shutter button all the way down in a
single movement, realtime release does not operate
• Take care that the distance from the camera to the
subject does not change If the distance does change,
start again from the first step.
• Take care not to touch the lens as this may result in
the picture being out of focus
• We do not recommend using red-eye reduction when
the flash mode is set to <§>(*) or <§>*H, as you
cannot take a picture immediately.
The focus lock function can be used in GO mode in the
same way as for normal photography. 39)
0-28