6、Factory Data Reset - Kind KD-BC-8H Instruction Manual

Note: Before enabling RTMP live broadcast service, please
configure the network information and fill in the correct
IP address and network management information to ensure
that the encoder can access the Internet normally。
6、factory data reset
If the user changes the parameters of the encoder and
the device does not work properly (most typically, the
network address is changed so that the encoder cannot be
accessed over the network), the factory Settings of the
device can
configuration to the factory default values。
Restore factory Settings：
On the WEB UI, choose Basic Settings > Restore Factory
Settings；
The device will be restored to factory Settings.
be restored to restore the encoder