WWW.KINDLIVECAST.COM 一、Notes on the use of live broadcasting machine • Before use, please read this manual carefully and keep it properly ; • Please follow the warning marks and instructions on the product; • Before cleaning the machine, please unplug the power first. Do not use alcohol, thinner, insecticide or other volatile solvents, because doing so will deform the shell or damage the surface;...
KIND recommends that you double-check the accuracy of the information in this document, and KIND is not liable for any omissions or errors. Or any subsequent loss or damage resulting from the information provided in the contents...
Note that for live performances, shows, and exhibitions, even your personal entertainment may be limited。 二、Product characteristics Product specification Model KD-LC-8N Power supply INPUT:AC110V-240V,50-60Hz,5A; OUTPUT:12V 25A Operating 0-40℃ temperature dimension (L*W*H)425mm*340mm*120mm...
Page 6
WWW.KINDLIVECAST.COM subtitle CG-Alpha DVE,Video playback,Virtual matting system configuration Intel i9CPU 9900,RAM 16G,1TB M.2,4GGPU system Windows 10 • Video processing:SDI+NDI+STREMA+DDR Local file,Hybrid switching station; • Audio processing: digital console + analog console + audio hardware delay device; • Recording: HD Video MPEG2-HL+MP4+ Built-in hardware recording unit (backup);...
WWW.KINDLIVECAST.COM 三、Live broadcast machine back interface and control board ⑴Introduction to the control panel of the broadcast machine ①Mixer, audio delay device, digital/analog audio switching keys ②Audio display ③8. Station channel address, preset bit call, speed adjustment ④Broadcasting call switching station (need to be run with subsystem) ⑤Record, stop, live button ⑥Subtitles, video, shortcut keys ⑦Effect regulator...
WWW.KINDLIVECAST.COM ⑬Multi-mode switch key ⑭PGM/PVW video switching station ⑵Introduction to the interface on the back of the broadcast machine ①Audio stereo, MIC input, output; ②DVI/HDMI signal source input; ③SPDIF: Optical fiber outlet、DP/HDMI Video output interface、 RJ45Network port USB3.1 interface、USB2.0 interface、USB3.0 interface、 TYPE-C interface;...
WWW.KINDLIVECAST.COM ⑶This section describes the interfaces on the back Interface Description XLR balanced analog audio output interface 1~5 audio input XLR balanced analog audio input interface and each channel with 48V phantom power switch (support for professional microphone power supply) 1~5 Audio input RCA stereo analog audio input (left/right channel) OUT audio output RCA stereo analog audio output interface...
Page 11
WWW.KINDLIVECAST.COM display The network port can access the network for software parameter debugging, live broadcast, and stream pushing USB3.1 supports 10GB/s data transmission speed USB port can be connected to the storage device to perform video file storage USB Type-c port supports image and audio transmission in addition to the transmission speed of 10G/S USB3.0 supports data transmission speed of 5GB/S...
WWW.KINDLIVECAST.COM 485 Control port: Uses RS485 control signals and supports PELCO-D and VISCV control protocols SDI1-4 video input ports supporting 1080i50 video source input HDMI video output port supports signal specifications 1080i50 video source output DC power port: Connect the 12V to 10A/150W adapter power cable to the DC power port ⑷This section describes the functions of the control panel Audio gain adjustment of channels 1-5, corresponding to 1-5 audio...
Page 13
WWW.KINDLIVECAST.COM switching keys, audio delay, and PGM audio gain adjustment. PGM Mute with one key。 Audio display: display left and right channels, delay time CAMERA1-8: 8 Address of the station channel. You can switch between different stations by pressing the button; FAST/SLOW:Control the camera speed, indicator light on for fast, light off for slow;...
Page 14
WWW.KINDLIVECAST.COM MENU:Press the camera MENU key to start the MENU adjustment mode and the 2/4/5/6/8 button lights up. 2/4/6/8 represents the top, left, right and bottom of the selection key. Press 5 (MENU) once to open the camera menu Note: The preset bit and camera menu functions cannot be used at the same time。...
WWW.KINDLIVECAST.COM 四、Introduction to the operation and use of live broadcast software 1. Software main interface The main interface of the software consists of PGM, PVW, video broadcast control panel and 8-way signal source preview window. ①PGM window: Main output screen; ②PVW window: Preview window to preview the next set of screens;...
WWW.KINDLIVECAST.COM 2. Record ( The four function buttons are live broadcast, pause, stop live broadcast and video and record respectively. The live broadcast software can select video recording by selecting WMV, MP4, AVI and MPEG, or record and stop on the live broadcast machine Hardware shortcut keys to record live.
WWW.KINDLIVECAST.COM 3. Live broadcast ①Open the live streaming service button first as shown in the picture above; ②Choose the right video and audio; ③Fill in the correct pusher address (do not add more symbols or Spaces to prevent pusher failure); ④Click the "Publish"...
Page 19
WWW.KINDLIVECAST.COM Video management function: manage recorded video, timing recording, MPEG recording and library management; ①The video management page is displayed: ②Click to view the management interface, display the video storage location; ③The automatic recording function allows you to add, modify, and delete tasks to implement scheduled recording。...
Page 20
WWW.KINDLIVECAST.COM Set the recording name and start time to add a task. When the task name appears in the list, the scheduled recording function is enabled View the video below: This interface allows you to view the recorded files in the current directory and transfer files through FTP upload server through library management:...
Page 22
WWW.KINDLIVECAST.COM The online packaging function includes the platform function and the Alpha channel special effect subtitle function, which can be used in double-layer superposition. Click the edit button next to the platform logo as shown below to add the platform logo and create the platform logo function in the video;...
Page 23
WWW.KINDLIVECAST.COM This mode is mainly used to create the position of the platform logo. The operation of the editing interface is shown in the following figure ①Conservation engineering area ②This mode is mainly used to import text, pictures, and clocks ③Analog subtitles preview the location of the player ④Each imported material can be modified through the parameter area, mainly used for material in the window to move floating effect;...
Page 25
WWW.KINDLIVECAST.COM ①Through the toolbar, you can import and add the ALPHA channel special effects video material on the local system, save the project and application effects operation; ②Import the material file; ③Filling in the text in the panel will be displayed at position 2; ④Subtitle text properties edit panel;...
Page 26
WWW.KINDLIVECAST.COM The DVE effect on the livestreaming machine can also be edited via the DVE mode of Alpha subtitles...
WWW.KINDLIVECAST.COM DVE editing only requires defining the channel selection on the media source of the corresponding dialog window, as shown below Note: T-pusher does not execute the switching logic in DVE editing state. In subtitle editing preview state, it executes and undo the subtitle effect on PGM.
Page 28
WWW.KINDLIVECAST.COM After the software enters the image picking interface, click the green background in the PVW small window for one-key image picking by default. As shown in the above figure, the darker the background color, the cleaner the image effect will be. If the effect is not ideal, the edge control bar will fine-tune the effect (Note: If it is still not ideal, please check whether the green or blue background cloth is the scratch green or scratch blue, or whether the background light is qualified.
Page 29
WWW.KINDLIVECAST.COM ①.Size control: Control background, large screen, TV wall size; ②. ③④ You can select the contents of channel 1-8 for setting; ③. ⑤⑥ can be added to a single video; When the knob encoder on the console of the broadcasting machine enters the image picking mode, edge control can be adjusted as shown below:...
WWW.KINDLIVECAST.COM Inside the advanced Settings, you can accurately repair the image picking function. 7. Software mixer. Click the horn button on the software to pop up the eight-channel audio controller. This function is mainly used for the adjustment of NDI and STREAM audio of each signal source channel.
WWW.KINDLIVECAST.COM 8. DDR The DDR window of the software is mainly used to add local pictures, videos, and PPT as signal sources to switch the broadcast. Recommended formats of live broadcast images are JPG and BMP. Resolution: 1080P Video format support: MP4 resolution: 1080P 720P code stream size: within 5MB The PPT function system can be enabled by installing office 2013 Double-click the VGA button to enter the push-pull mode Settings...
Page 32
WWW.KINDLIVECAST.COM Search for the NDI signal source in the LAN and configure the corresponding channel address. The current channel is channel 1, so select Channel 1. The NDI signal can be generated as shown below: Select the "Set" button in the stream state to pop up the "Push and pull"...
Page 33
WWW.KINDLIVECAST.COM In push mode, a mobile phone or any device with the push function can be used to push the stream in the LAN. According to the push address in the push mode, the push stream can be sent to the device as a signal source to switch the broadcast.
This function is used to monitor the hardware load of the software under various conditions of recording live broadcast. 五、Beijing kind Network Technology Co. LTD Address: 16C, Unit 1, Building C, Yingdu PLAZA, No. 48, Zhichun Road, Haidian District, Beijing,China.
Need help?
Do you have a question about the KD-LC-8N and is the answer not in the manual?
Questions and answers