dreambaby F820AL Instructions

F820AL.F1012AL _IM_ 10.11.2020_X.03
\
a F820AL (white)
701106 EZILAR
Patent No. 11/604,922
EN1930:2011
Read the entire instructions before assembling and installing this product.
if you sell or give away this product, make sure you give this instruction to the new owner.
INSTRUCTIONS
Retractable Gate
o, œ
JK dreambab
growing safely
Á WARNING
WARNING- Incorrect installation can be
dangerous.
WARNING- Do not use the safety barrier if
any components are damaged
or missing.
WARNING- The safety barrier must not be
fitted across windows.
This safety barrier conforms to EN1930:2011;
This safety gate is for domestic use only;
This safety gate has been designed for use
with children up to 24 months of age;
Never use with a child able to climb over or
dislodge/open the gate;
The surfaces that the gate is to be fixed to
must be suitable for the purpose and must be
-AN WARNING: This package contains small parts and sharp points in an :
unassembled state. Keep out of reach of children. Adult asser
The clearance space between the Base of
Casing and the floor MUST NOT exceed 0.3cm
(0.12in);
If the safety barrier is used at the bottom of
the stairs, it should be positioned at the
front of the lowest tread possible;
If the safety gate is used at the top of the
stairs to prevent child falling down the
At the top of landing, position the gate
15cm away from the top step;
This safety gate has a manual close system;
This safety gate must NEVER be used as a
pool or pond barrier;
Never leave a child unattended.
This safety gate does not replace proper adult
supervision.
WARNING- Never use this gate without
securely installed Locking
Brackets and Locking Hooks.
structurally sound; stairs, it must not be placed on any stair
below the level of the top stair;
PARTS LIST
Gate Panel
Cover
Upper Bracket
Lower Bracket
Upper Hook
Lower Hook
Locking Rod
Screws 4x25mm (5/32 x1in) (x8)
Masonry/Brick Plugs (x8)
Templates (x5)
Skirting Board Kit
Before you start
Q «
measure. pencil. drill with
4mm (5/32 x1in) drill bit
and a Phillips head
This gate can cover
an area of up to
Base of Casing
Top of Casing
Release Button