Advertisement
Quick Links
WARNING
:
Failure to follow these directions and
warnings can result in serious injury and/or product damage.
!
Assistance is required to assemble this bed.
If any parts become missing, damaged or worn, discontinue use until
!
they are replaced with identical parts.
!
Periodically re-tighten all bolts.
!
This item is intended for indoor use only.
!
Never stand on or use this bed as a ladder.
!
Always seek assistance before moving furniture.
!
Make sure the headboard is properly attached to bed frame before use.
Do not exceed 500 pounds (226.80 kgs) weight limit on the bed, evenly distributed.
!
#181520 Layne Bed
Assembly Instructions
#6441 Q/K
Assembly Instructions
CONTACT
for assembly questions on
Weekdays // 8am-8pm EST
Saturday // 9:30am-6pm EST
EMAIL
p s @ g r a n d i n r o a d . c o m
1.800.491.4958
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Grandinroad 181520
Summary of Contents for Grandinroad 181520
- Page 1 #181520 Layne Bed Assembly Instructions #6441 Q/K Assembly Instructions WARNING Failure to follow these directions and warnings can result in serious injury and/or product damage. Assistance is required to assemble this bed. If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts.
- Page 2 PARTS Please con rm you have the necessary parts to complete the assembly. COMPONENTS TOOLS Upper Headboard Left Headboard Frame ALLEN WRENCH Footboard Lower Headboard SCREWDRIVER (NOT INCLUDED) Right Side Rail Center Support Rail Left Side Rail Center Leg 1.800.491.4958 Right Headboard Frame...
- Page 3 PARTS Please con rm you have the necessary parts to complete the assembly. HARDWARE TOOLS Wood Dowels (x4) ALLEN (M10*40) WRENCH Long Bolts with Washers (x1 1) (5/16”x45mm) SCREWDRIVER (NOT INCLUDED) Short Bolts with Washers (x12) (5/16”x30mm) Screws (x6) (#8x30mm) 1.800.491.4958...
- Page 4 ASSEMBLE Layne Bed FASTEN the Upper Headboard (A) to the Lower Headboard (G) by using 3x Long Bolts with Washers (K), as shown below. NOTE: Please Do Not Over Tighten. Upper Headboard Right Headboard Frame Left Headboard Frame INSERT 4x Wood Dowels into Upper Headboard in the locations shown below.
- Page 5 ASSEMBLE Layne Bed FASTEN the Left and Right Headboard Frames (E,F) to the Headboard Assembly by using 8x Long Bolts with Washers (K) . HEADBOARD NOTE: Please Do Not Over Tighten. ASSEMBLY FLIP With help the Headboard Assembly upright. Long Bolt with Washers (x8) Short Bolt with Washers (x6)
- Page 6 ASSEMBLE Layne Bed INSERT 6x Short Bolts with Washers (L) only halfway into the Footboard (B) leaving about a 1/2” sticking out of Footboard (B), as shown. HEADBOARD ASSEMBLY Footboard Footboard LOWER With Help, the Left Side Rail (D) onto the Short Bolts with Washers of the Headboard assembly and Footboard assembly that were purposely left sticking 1/2”...
-
Page 7: Bed Assembly
ASSEMBLE Layne Bed TIGHTEN Once both side rails are in place, all 12x Short Bolts with Washers (L), from Steps 4 and 5, that the Left and Right Side Rails (C,D) now rest on. BED ASSEMBLY NOTE: Do Not Over Tighten. Center Support Rail (x3) Center Support Leg (x3) CONNECT... - Page 8 ASSEMBLE Layne Bed FASTEN each Center Support Rail Assembly x3 into each cutout of the Left BED ASSEMBLY and Right Side Rails (C,D), of the Assembly using a philips head screwdriver to attach 6x Screws (M) in the locations cutout shown below.
- Page 9 ® #181520 Layne Bed Assembly Instructions Please contact one of our Product Specialist for assembly assistance questions or questions at 1-800-491-4958. Specialist are available weekdays 8:00 AM to 8:00 PM EST or Saturdays 9:30 AM to 6:00 PM.
Need help?
Do you have a question about the 181520 and is the answer not in the manual?
Questions and answers