Important Additional Information - Hyundai KONA Electric Emergency Response Manual

Hide thumbs Also See for KONA Electric:
Table of Contents

Advertisement

9. Important additional information

9. Important additional information.
9.1 Emergency starting
Jump starting
9.1 Emergency starting
Do not attempt to jump start the high-voltage battery, as it cannot be jump started. In case
of full discharge of the high-voltage battery, the vehicle must be towed as mentioned on the
Jump starting
previous page. In case the 12V auxiliary battery is discharged, refer the below procedure.
Do not attempt to jump start the high-voltage battery, as it cannot be jump started. In case of full discharge of the high-
1. Make sure the booster battery is 12V and that its negative terminal is grounded.
voltage battery, the vehicle must be towed as mentioned on the previous page. In case the 12V auxiliary battery is discharged,
refer the below procedure.
2. If the booster battery is in another vehicle, do not allow the vehicles to come in contact.
1.
Make sure the booster battery is 12V and that its negative terminal is grounded.
2.
If the booster battery is in another vehicle, do not allow the vehicles to come in contact.
3. Turn off all unnecessary electrical loads.
3.
Turn off all unnecessary electrical loads.
4.
Open the hood and then remove the 12V battery cover (A) (refer to page 8).
5.
Connect the jumper cables in the exact sequence shown in the illustration.
First, connect one end of a jumper cable to the positive terminal of the discharged battery (1) then connect the other
4. Open the hood and then remove the 12V battery cover (A) (refer the 8 page).
end to the positive terminal on the booster battery (2) Proceed to connect one end of the other jumper cable to the
5. Connect the jumper cables in the exact sequence shown in the illustration.
negative terminal of the booster battery (3) then the other end to a solid, stationary, metallic point away from the fuse
box (4).
First, connect one end of a jumper cable to the positive terminal of the discharged battery
(1), then connect the other end to the positive terminal on the booster battery (2).
CAUTION
Proceed to connect one end of the other jumper cable to the negative terminal of the
booster battery (3), then the other end to a solid, stationary, metallic point away from
Do not attempt to jump start the KONA EV high-voltage battery.
the fuse box (4).
Failure to follow these instructions will lead to serious bodily injury or death by electrical shock.
Do not attempt to jump start the KONA EV high-voltage battery.
Failure to follow these instructions will lead to serious bodily injury or death by electrical
shock.
23
24

Advertisement

Table of Contents
loading

Table of Contents