Sanyo LCD-19E3 Service Manual page 10

4-2.6 Exit Factory Mode:
After finishing adjusting color temperature, press [MENU] to exit factory mode.
5. Items of Factory menu
Vendor may customize design and add adjustment items Factory menu as far as all required items are
included.
Press up and down key can move high light item from Color Temperature Warn -> Color Temperature
Medium -> Color Temperature Cool ->Preset Channel-> Source Calibration -> Reset to Default.
The NV Clear and Reset to Default items will have a check dialog "YES" and "NO" to do or not.
Push "Enter" key can select high light item function. (Press left and right can adjust value)
Display model name, firmware version and released date on top.
10