Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GeoSlam ZEB POLE
Summary of Contents for GeoSlam ZEB POLE
- Page 1 Unbox and Assemble with the ZEB Horizon...
- Page 2 4. Universal mounting plate attached to the back of the ZEB Horizon scanner head 5. Separate sections of the pole 6. Pole sections screwed together 7. ZEB Pole parts kit 8. Large HEX key removing large screw 9. Small screw inserted into pole 10.
- Page 3 1. Unboxing When a pole accessory is bought, the kit will include: • ZEB Pole • Universal Mounting Plate A screw accessory kit will also be included which contains all of the screws needed to attached the ZEB Horizon system to the pole.
- Page 4 2. Assembly Step 1. Remove the handle from the ZEB Horizon scanner head by lifting the pin upwards and sliding the handle out of the scanner head base. Then remove the rubber dampers from the back of the ZEB Horizon scanner head. Figure 2.
- Page 5 – this is required to attach into the universal mounting plate. Figure 7. ZEB Pole parts kit Figure 8. Large HEX key removing large screw Figure 9. Small screw inserted into pole...
- Page 6 Step 5. Screw the pole into the central threaded hole on the universal mounting plate. Figure 10. Pole attached to the universal mounting plate Step 6. Each section can be lengthened by loosening the screws between sections and extending the pole to the length appropriate for your data capture. Figure 11.
- Page 7 Figure 12. Main cable attached to the Horizon system The ZEB Horizon is now set up with the pole. Please refer to the ZEB Horizon User Manual for further information about how to operate the system.
Need help?
Do you have a question about the ZEB POLE and is the answer not in the manual?
Questions and answers