Table of Contents
Advertisement
When the Deck 1 pause and record buttons are pressed, tape editing starts by pressing the Deck 2 playback button.
Only normal tape can be used with this unit.
Press Deck
1 STOP/EJECT
and Insert the tape to be re-
corded.
Insert the tape with the side to be re-
corded facing you.
Press
Deck
2 STOP/EJECT
and
insert
the tape to be
played back.
Insert the tape with the side to be played
facing you.
4
oH
Select the editing speed by
NORMA EDITING
setting EDITING.
HIGH
: High speed
NORMAL : Normal speed
Press
Deck
1 PAUSE,
then
press REC.
Editing is started by means of the synchro-start function.
Do not set the "CD" or "RADIO" function selector during editing.
Do not change the editing selector during editing. The playback
sound may flutter.
Some TV sets generate noise that could be recorded during editing.
To prevent the possibility of this, do not use this unit closer than
1.5 m to a TV set.
To stop the editing:
ROPE
Press the Deck 1 and Deck 2
STOP/EJECT.
For your reference:
Recording is not affected by changes made to the volume or tone
quality during the recording.
The recording level and the noise reduction effect of the original
(playback) tape will be recorded on the new tape,
21
Advertisement
Table of Contents
