Table of Contents
Advertisement
Only normal tapes can be used with this unit.
Easy CD recording
Length of tape required
Lights
to record all tracks
Press Deck 1 STOP/EJECT and
insert the tape which is longer
than the length displayed in
step 2.
* Insert the tape with the side to be recorded
facing you.
* Rewind
the tape completely
before
recording.
Press @ REC.
The CD is set to the pause mode at the
start of the first track.
After a 10-second blank is recorded on the
leader tape, recording starts automatically.
The tape stops when the end of top side is
teached, The CD is set to the pause mode.
Press STOP/EJECT
and turn
the tape over.
6
ac
Press @ REC.
After a 10-second blank is recorded on
the tape, the track which was partially
recorded
on the end of the tape is
recorded from its beginning.
To stop recording:
sioeeect
Press M/CLEAR and STOP/
mH oS
Recording your favourite tracks:
After programming your favourite tracks (see page 15), perform
steps 2 to 6 above.
Type of tape which can be used for recording:
NormalV/TYPE I
Oo
CrO2/TYPE I
x
Metal/TYPE Iv
x
If the unit is brought near a TV set during recording, noise may be
recorded due to the effects of the signals from the TV set. Maintain
a distance of a least 1.5 meters between the unit and a TV set.
For your reference:
* Any change made to the volume or tone quality during recording
will not affect the recording.
«In order to prevent trouble caused
by flat batteries, it is recom-
mended that you either supply power to the unit from the house-
hold AC outlet or replace ail the batteries with new ones when you
are recording something which is important to you.
19
Advertisement
Table of Contents
