Before Using For The First Time; Starting An Empty Washing Cycle - Bosch WAX32M40SG User Manual And Installation Instructions

en first time
first time
6 Before using for the
first time
Prepare the appliance for use.
first time
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
Press .
1.
The switch-on process takes a few
seconds.
Set the ⁠ Drum Clean pro-
2.
gramme.
Close the door.
3.
Pull out the detergent drawer.
4.
Add washing powder that contains
5.
a bleaching agent to compart-
ment II.
To prevent foaming, use only half
of the amount of detergent recom-
mended by the detergent manufac-
turer for light soiling. Do not use
detergent suitable for woollens or
delicates.
Push in the detergent drawer.
6.
Press Start / Reload
7.
programme.
a The display shows the remaining
programme duration.
20
a After the programme has ended,
8.
to start the
the display shows: -0-.
Start the first wash cycle or press
to switch off the appliance.
→ "Basic operation", Page 30