Advertisement
Due to continuous improvement, actual product may different from the manual, manual is for reference only.
NOTE
As following picture, connect the power adaptor.
Press" "button or press remote control to get the projector on.
As the projector start working, after screen display 2 to 5 seconds of boot screen, then come into the multimedia screen.
Keystone
Sometimes, the images which are projected on the wall is a little twisted as a ladder could take a keystone to adjust it. The keystone technology is the method to get the image normalization by digital or optical technology.
Solution
Our projector provide optical keystone function, you could correct the keystone to adjust the image.
Image focus
Put the projector vertical to the projector screen or white wall, correct the keystone to a rectangle, then adjust the focus to until the image is clear enough. During the focusing you could display the video on the menu to check the focus adjustment.
Solution
Our projector have no level keystone function, and if have this problem, the reason is you haven't keep the projector vertical with the projector screen, the solution is to adjust the projector's position, and keep the projector on the same level.
*Could connect multi-device and applications.
Multimedia Supported format
Multimedia | Audio support | MP3/WMA/OGG/AAC/FLAC/APE/WAV |
Photo support | JPEG/BMP/PNG | |
Video support | 3GP/AVl/MKV/FLV(FLV)/MOV/MP4/MPG/VOB/MPG/RMVB/RM | |
Text support | TXT |
Use 3 in 1 cable video convert cable, connect projector AV slot, the connect method is that like the picture, as connected, choose the signal source video.
Support Format: NTSC / PAL
HDMI slot could connect to computer and all the device with HDMI slot, As connected choose the source HDMI.
Support files: 576R, 480R, 720P, 1080P, 640*480, 800*600, 1024*768, 1280*1024, 1280*720, 1440*900, 1920*1080, 1366*768, 1280*800, 1440*960, 1600*1200, 1680*1050
Our projector support HDMI slot and MHL cable.
Use them to connect your mobile and tablet to projector.
*Please consult your mobile's factory or agency for this function.
*This function may be affected by device and cable.
Could connect 3.5mm earphone and speaker equipment.
Notice: Due to Dolby copyright, this projector not support Dolby related decode.
Image menu
Remote control use guide: press " " key then the main menu come out. Press "
" key choose to come into the image submenu. Press "
" key, choose the program which you want to adjust. Then press "OK" key come into setting.
In the image, you could set the following models, such as picture mode (standard soft, user, dynanmic), color temperature (cold, Medium, user), aspect ratio (auto, 4:3, 16:9) noise reduction (Off, Low, Middle, High, Default).
Press "" key, and then get the main menu. Press "
" key, choose audio submenu. Press "
" key, choose the items which you want to adjust. Then press "OK" key come into setting.
In the audio, you could set the balance (-50- +50), auto volume (open, off), auto volume (Off, Low, Middle, High, Default), surround sound (Off, SRS, Surround).
Set time sub-menu
Press "" key an the remote control, and get the main menu, then press "
" key, choose time submenu, press "
" key, choose the items which you want to adjust, then press "OK" key to come into set.
In the setting, you can set the clock, off time, on time, sleep time, auto sleep
Set sub-menu
Press "" key on the remote control, then press "
" key to set submenu. Press "
" key, choose the program which need adjust, then press "OK" key to come into setting. You can set the language, back to factory setting, and upgrade software.
You can control the content by the display menu.
Imaging technology | TFT LCD |
Resolution | 128*720RGB |
Highest resolution | 1920*1080 |
Light | LED |
Lens | Multichip coated lens (F=134) |
Operation mode | Manual operation |
Projection distance | 5---15 ft |
Screen size | 44---200 inches |
Optimum projection size | 60" |
Minimum imaging distance | 1.8M |
Aspect ratio | 16:9 |
Color temperature | 16M |
Keystone | Manual correction±15o |
Power input | 100V-240V-50/60Hz |
Integrated watt | 72W |
Input | HDMI/USB*2/VGA/AV |
Output | Earphone |
Speaker | 3W |
Unit size | 245*166*81.5mm |
Projection ratio | 1:4 |
Net weight | 1.25kg |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the YG420 and is the answer not in the manual?
Questions and answers