Advertisement
aE
@eorr--
V7, 'ee
a
wooy
Ne
a
This display appears
and operation stops.
The oven area is hot (above 105°F).
This may occur during repetitive
use. You must allow the unit to cool
down before reusing.
The bread pan either has not been
placed or has been placed
incorrectly in the unit.
There has been an interruption in
the power supply (power failure,
unplugging of the power cord, or a
malfunctioning of household fuse or
breaker).
There has been a 10-minute or
less power outage. (The power plug
has been inadvertently pulled out or
the breaker has activated.) Alert
indicator appears in the display.
When the oven area has cooled, all
of the indications will go out.
Press [2] pad, and [==] pad.
Place the pan correctly and then
press
pad again.
all of the indications will go out.
O
Howtoreset
If the outage lasts longer than 10
minutes, the operation of the unit stops.
Remove the dough and start again
using all new ingredients.
If the interruption in the power
supply is momentary, the operation
will not be affected.
If the power is restored within 10
minutes, the bread maker will operate
again. However, the bread may not
turn out well.
unit will restart 30 minutes later.
Check to see if the blade spindle of the bread pan can rotate. If it can rotate,
restart the bread maker after 30 minutes. If it cannot rotate, servicewill be
required.
— 20 —
Advertisement
