Specification - Lanzar HERITAGE HTG 2600D Owner's Manual

Specifications
Model
RMS Power, INTO 4 Ohms
RMS Power, INTO 2 Ohms_
RMS Power, INTO 1.3 Ohms
MAX Power, INTO 1.3 Ohms_
BRIDGE MAX Power, INTO 2 Ohms
THD at 1 Watt, 4 Ohm
Signal-to-Noise Ratio, below rated power output
Frequency Response, at 1 Watt, 4 Ohm
Damping Factor at 20Hz, 4 Ohm
Low Pass Filter
Variable Subsonic Filter
Bass Boost
Phase Control
Input Sensitivity
Input Impedance
Line Output Impedance
Dimensions(lnches)
Fuse Rating
Specifications
3