Wall Unit Mounting.77 - AEG DD 8625 Operating And Installation Instructions

Wall unit mounting - Fig. 8-9-10
Pre-mounting operations (Only for
model DD 8625-8821)
First decide which functioning version is
better for you.
If you decide to use the hood in
exhausting version we suggest to position
the upper section of the chimney so that
the oulet slots are not visible once
installation has ended, on the contrary if
is decided to use the hood in recycling
version BE SURE that the side with slots
is up (see also A-B-C sequence on on
Fig. 8).
Assembling the chimney flue support/
bracket (Only for model DD 8665-8695-
8861-8891-8990):
The three parts should be fixed with 4
screws, the support extension is
adjustable and should correspond to the
internal width of the telescopic chimney
flue. Fig. 9.
Fig. 9
77