C O N T R O L S & D I S P L AY
Note: You can also use the VeSync app to control these functions, as well as additional app-only features
(see
VeSync App
Functions, page 14).
On/Off Button
•
Tap to turn the humidifier
on/off.
•
Press and hold for 5 seconds
to pair with the VeSync app.
See the in-app instructions
for more information.
•
Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier's default
settings and disconnect it
from Wi-Fi® and the VeSync
app (see page 11).
Timer Button
•
Tap to set a timer for 1–12
hours.
•
Press and hold for 2 seconds
to begin cycling through
the timer options in 1-hour
increments.
•
After a timer is set, the
display will flash 3 times,
then show a countdown until
the timer is finished.
•
To turn a timer off before it
is finished, tap
display shows "– –" or tap
to turn the humidifier off.
Display Off Button
•
Tap to turn the display off.
•
Tap any button (except
to turn the display on. If no
other button is pressed after
6 seconds, the display will
automatically turn off again.
until the
)
Display Lock Button
•
Press and hold
seconds to turn Display
Lock on.
will show on the
display.
•
will flash 3 times when
any other button is tapped
to indicate that Display Lock
is on.
•
Press and hold
seconds to turn Display
Lock off.
•
You can also turn the Display
Lock on/off in the VeSync
app.
Humidity Level Button
•
Tap to set a target humidity
level from 30–60% that's
used with Auto Mode.
•
Continue tapping to cycle
through target humidity
options in increments of 5%.
•
You can also change the
target humidity level in the
VeSync app (see page 14).
Fan Speed Button
•
Tap repeatedly to cycle
through fan speed settings:
low, medium, and high.
Auto Mode Button
•
Tap to turn Auto Mode on
(see page 12).
•
Tap
,
, or
Auto Mode and resume
manual controls, or tap
for Sleep Mode.
•
You can also turn Auto Mode
on/off in the VeSync app.
for 3
for 3
to exit
7