Pioneer SX-2700 Operating Instructions Manual page 10

3.3 kHz: The 3.3 kHz contro! will add brilliance and clarity to brass
instruments and violins.
10 kHz: The 10 kHz control can be used to make up for missing high
frequencies absorbed by the environment and to add a natural
crispness to music.
Emphasize
frequency range.
De-emphasize
frequency, range.
* Check that all terminals are properly connected before switching on
the unit.
© Be sure to turn the TAPE 2 MONITOR switch OFF when listening to
AM or FM broadcasts,
AUTO TUNING (FM reception)
3 5 24
. Turn on the POWER switch of the unit.
. Press the TUNER switch of the function switches.
- " for a higher or lower frequency as desired.
NOTE:
is recommended.
10
<ARBI213>
PWN =A
MANUAL TUNING (FM/AM reception)
3 5 24
. Turn on the POWER switch of the unit.
. Press the TUNER switch of the function switches.
BAND selector switches.
5. Use the TUNING switches to locate the frequency of
the desired station.
release it immediately. For continuous rapid scanning keep the
TUNING switch pressed. The TUNED indicator will light up when
the station is tuned in best.
NOTE:
distances or when signals are weak.
Wn =