ASROCK iEP-7020E Series User Manual page 5

Table of Contents

Advertisement

Replaceable batteries
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
BURN HAZARD
Hot surface! Do not touch! Touching this surface could result in bodily injury. To reduce
risk, allow the surface to cool before touching.
CAUTION
The equipment is equipped with a battery-powered real-time clock circuit. There is a risk
of explosion if a battery is incorrectly replaced. Replace only with same or equivalent
type as recommended by the manufacturer. Discard all used batteries according to the
manufacturer's instructions.
WARNING
All interconnection to the EUT is for indoor location and therefore PoE network
interconnected to the EUT is considered as ES1/SELV for connected only to PoE network
without routing to the outside plant.
WARNING
Input voltage rated 9-36V, 13.33-3.33A (For Basic SKU)
Input voltage rated 19-36V, 7.89-4.17A (For PoE SKU)
Input voltage rated 9-36V, 11.61-2.90A (For 5LAN SKU)
Input voltage rated 9-36V, 13.33-3.33A (For 5G SKU)
Packing: The unit should be carried with both hands and handled with care.
Maintenance: Use only approved products or a dry applicator to clean and maintain the
surfaces.

Advertisement

Table of Contents
loading

Table of Contents