Vcr 8 Cassette Information; Reset Al Vcr Memory Functions; Record/Playback Time - Panasonic OmniVision PVQ-V200 Operating Instructions Manual

VCR & Cassette Information
Reset all VCR Memory Functions
Use when moving VCR to new location, or if a mistake
was made in the One Time VCR Setup section.
* Make sure a tape is not inserted in the VCR.
Power on.
2 Press and hold both PLAY
and CHANNEL Á on the VCR
for more than 5 seconds.
¢ The power will shut off.
3 Do "One Time VCR Setup" steps on page 6.
DST (Daylight Saving Time)
VCR auto adjusts clock for DST. (Page 7.)
Spring (First Sunday in April)
DST:ON --> sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON --> Turns clock back one hour.
* If your area does not observe Daylight Saving
Time, select DST:OFF.
+ Keep these time changes in mind when
programming the VCR for timer recordings.
Prevent Accidental Tape Erasure
Break off the tab.
Record Tab
S
Screw driver
| To record again Ze |
Record/Playback Time
Only use tapes with the mark in this unit.
Type of Video Cassette
T120 | T160
Tape Speed
Setting
LP
(Long Play)
For assistance, call 1-800-211-PANA(7262).