Advertisement
2.
INTRODUCTION
Compact, lightweight cordless impact driver. Comfortable composite housing with soft grip to reduce vibration. Variable speed control
trigger with lock function gives more control during application. All metal gear construction for ultimate durability and performance.
Integrated LED battery level indicator and LED work light. Supplied with belt hook for safer storage while not in use. Requires Model No.
CP1200BP 12V 1.5Ah Lithium-ion Battery and Model No. CP1200MC Battery Charger.
3.
SPECIFICATION
Model No: .......................................................... CP1203
Battery Options (not included): ..... 12V 1.5Ah Lithium-ion
........................................................ 12V 3Ah Lithium-ion
........................................................ 12V 4Ah Lithium-ion
Drive: ..................................................................1/4"Hex
Impact Rate: .................................................. 0-3500bpm
Maximum Torque: ...................................... 80Nm(58lb.ft)
Noise Power/Pressure:.................................. 89/78dB(A)
No-Load Speed: .............................................0-2500rpm
Replacement Parts: ............ CP1200MC - Mains Charger
Vibration/Uncertainty: ................................ 2.898/1.5m/s²
4.
OPERATION
4.1.
USING THE IMPACT DRIVER
4.1.1. Ensure the direction selector (fig.1) is in the mid (lock) position.
4.1.2. Insert the required driver bit into the chuck by pulling the locking
collar forward and sliding the bit in until the locking ring snaps back.
4.1.3. Select clockwise or anticlockwise direction by means of the direction selector.
4.1.4. Squeeze the trigger to start the driver; initial pressure switches on the LED worklight, further pressure starts the motor and increases
speed.
4.1.5. To release the bit, pull the locking collar forward and withdraw.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact
your local solid waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
fig.1
www.sealey.co.uk
CP1203
REGISTER YOUR
PURCHASE HERE
Issue 3 (ALL)
13/06/23
Advertisement
