Advertisement
FD-42A
be ee
NOTE
ON THE ANODE
CAP REMOVAL
Even when the power switch is off, the voltage at
2. Pinch and remove the anode pin with a pair of
the anode cap is still high.
tweezers.
Remove the anode cap as follows.
At this time, be careful not to scratch the anode
1. Discharge the anode pin to the ground.
button.
anode pin
anode cap
\
anode button
Caution on Reinstallation :
Confirm that the anode button is inserted into the anode cap
securely.
:
BAND SELECT switch
Telescopic antenna
EXT ANT (external antenna)
_______-»-} [
jack (left side)
(left side)
VOL (volume) control
Tuning knob
BRT (brightness) control ~
(left side)
Dial scale
DC IN 6V (external power
input) jack
'ae Battery compartment (rear)
Screen
EARPHONE
jack
CONTR
(contrast) control
BRT (brightness) control
turning it clockwise.
Advertisement
