Picture Tube Removal; Removal Of Anode Cap - Sony TRINITRON KV-28WF1A Service Manual

www.freeservicemanuals.info

2-7. PICTURE TUBE REMOVAL

Two DGC holers
6
3
C board
4
Neck assy
9 Four PT screws
1 Anode cap
10
Picture tube
• REMOVAL OF ANODE-CAP
Note: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or
carbon paint on the CRT, after removing the anode.
* REMOVING PROCEDURES.
7
Degaussing coil
a
8
Spring extension
1
Turn up one side of the rubber cap in
the direction indicated by the arrow a
2 Chassis assy
•
HOW TO HANDLE AN ANODE-CAP
1 Don't damage the surface of anode-cap with sharp shaped material !
Don't press the rubber hardly not to hurt inside of anode-caps !
2
A metal fitting called as shatter-hook terminal is built into the rubber.
3 Don't turn the foot of rubber over hardly !
The shatter-hook terminal will stick out or damage the rubber
5 Deflection yoke
Cushion
World of free manuals
b
b
2 Using a thumb pull up the rubber cap 3 When one side of the rubber cap is
firmly in the direction indicated by the separated from the anode button, the
arrow b anode-cap can be removed by turning
up the rubber cap and pulling it up in
the direction of the arrow c
.
6/8/2013
c
Anode button