Advertisement
2.
INTRODUCTION
Compact, lightweight cordless impact wrench. Comfortable composite housing with soft grip to reduce vibration. Variable speed control
trigger with lock function gives more control during application. All metal gear construction for ultimate durability and performance.
Integrated LED battery level indicator and LED worklight. Supplied with belt hook for safer storage while not in use. Requires Model No.
CP1200BP 12V 1.5Ah Lithium-ion Battery and Model No. CP1200MC Battery Charger.
3.
SPECIFICATION
Model No: .......................................................... CP1204
Battery Options (not included): ..... 12V 1.5Ah Lithium-ion
........................................................ 12V 3Ah Lithium-ion
........................................................ 12V 4Ah Lithium-ion
Breakaway Torque: ................................. 120Nm(89lb.ft)
Drive: .......................................................... 3/8"Sq Drive
Fastening Torque: ..................................... 70Nm(52lb.ft)
Impact Rate:.................................................. 0-3500bpm
Noise Power/Pressure: ............................... 105/94db(A)
No-Load Speed: .............................................0-2500rpm
Replacement Parts:............ CP1200MC - Mains Charger
Vibration/Uncertainty: ................................ 13.77/1.5m/s²
4.
OPERATION
4.1.
FITTING THE BATTERY
4.1.1. Fit the battery pack to the wrench by aligning the tongue on the
battery with the groove in the housing and slide into place.
4.1.2. Ensure that the battery pack is firmly located.
4.1.3. A click will be heard when it has locked into position.
4.2.
USING THE IMPACT WRENCH
4.2.1. Fit the socket to the wrench by snapping it onto the square drive.
Note: Only use impact grade sockets.
4.2.2. Select the required direction of rotation.
4.2.3. To change direction, turn the direction control (fig.1) to the left or right.
change direction, turn the direction control (fig.1) to the left or right.
DO NOT attempt to change the direction of rotation whilst trigger is depressed.
8
4.2.4. Speed can be controlled by varying the finger pressure on the trigger. Initial pressure will switch on the worklight.
4.2.5.
4.2.5. W W hen tightening, take care not to over-torque small fixi
hen tightening, take care not to over-torque small fixings.
Note: On critical fixings always check the torque with a torque wrench according to the product or vehicle manufacturer's guidelines.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact
your local solid waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.1
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
CP1204
Issue 3 (ALL)
REGISTER YOUR
PURCHASE HERE
13/06/23
Advertisement
