Kenwood TM-201A Instruction Manual page 3

1. FEATURES
¢ Compact, slim transceiver for
easy mobility
¢ Microcomputer provides
multi-frequency control
functions
¢ Dual function keyboard
facilitates memory recall (MR)
© High reliability by using PC
boards for each unit; high
sensitivity (12 dB SINAD
0.22 uN) front-end using
GaAs FETs
® Quality sound for transmission
and reception ~
® HI/LOW switch controls output
power
¢ Repeater operation
* Extended frequency range*
—
OmKRWNH =
~N
. Coaxial connector with cable greatly reduces effective depth when connec-
ting an antenna cable.
. External speaker system allows installation in any place.
. Remote frequency control unit (FC-10) extends your operation facility.
. Five channel memories plus COM* channel can be recalled at will.
. ALERT function monitors memory channel 1 (M1).
. Memory scan operation (MS) from memory channels 1 through 5.
. Programmable scan within the frequency range selectable.
. 1 MHz step-up function (MHz).
. VFO A in 5 kHz (25 kHz; for European and British versions) steps; VFO B in
5 kHz steps.
. Beeper indicates each of 7 modes.
L ae
Lt Lo
POWER/VOL s s SQUELCH
. External communications speaker, 77 mm in dia., supplied.
2. Maximum 3% modulation distortion ensures good quality transmit signal.
2.
3.
. COM* system facilitates access to repeaters with the TU-3 unit* (option) in-
stalled. '
The TU-3 2nd tone frequency (one of 37 frequencies selectable) intercon-
nected with the TX OFFSET system enables access to a repeater.
The REV switch monitors direct signal. .
Covers 142.0 ~ 149.0 MHz in 5 kHz steps.
* European and British versions excluded.