Download Print this page

Sony WALKMAN PROFESSIONAL WM-D6C Operating Instructions Manual page 10

Hide thumbs Also See for WALKMAN PROFESSIONAL WM-D6C:

Advertisement

FUNCTIONS TO MAKE
RECORDING/PLAYBACK
EASY
MIC ATT (attenuator) switch
Cue and review function
Il (pause) button
moment in playback or recording mode. To re-
start, press the button again to release it.
To stop the tape for an extended time, use the
4
button.
Automatic shut-off mechanism
In fast forward or rewind mode, however, the
locked button wil! not be released automati-
cally. Be sure to press the &m button to re-
lease it,
One touch review function
During recording, you can listen to the mate-
rial just recorded with this function. While
recording, when
the <q
REVIEW
button
is
depressed,
only the @ RECORD
button will
be released and the tape will be rewound. By
releasing
the
<@
REVIEW
button,
the
recorder will go into the playback mode.
10
Instant edit function
During
playback,
simply
depress
the
@
RECORD
button,
and
the recorder
will im-
mediately
change
to the recording
mode.
This function is convenient for correcting a
previously recorded portion.
Peak/battery indicatay
and indication selector
To observe the input level during recording or
recorded level during playback, set this selec-
tor to PEAK.
The indicator will show the input level or the
recorded level for either the left or right chan-
nel, whichever is higher at that instant.
To check the battery condition, set the selec-
tor to BATT. The bottom-most LED will light
to show the battery condition. If the indicator
glows faintly, replace all batteries at once.
When the selector is set to OFF, no LED will
light up.
-
;
Tape counter for indexing the tape contents
Before recording, push the reset button to set
the counter to ''000". Make a note of the fig-
ures to help you locate later a desired pro-
gram on the tape.
To prevent accidental erasure
Break out the small tabs on the rear of the
cassette. The @ RECORD
button cannot be
depressed if a cassette with its tabs broken
out is used. To reuse a cassette for recording
after the tabs have been
removed,
simply
cover the slots with a small piece of cello-
phane or vinyl tape.
S
cellophane tape
To make a blank erasure
1
Insert a cassette.
2
Ensure that nothing is connected to the
LINE IN and MIC jacks.
4
Depress the @ RECORD button.

Advertisement

loading