Table of Contents
Advertisement
Table 3-5. Set Last Measurement Functions
Model 5355A
Operation and Programming
NOTE
For automatic offset mode or manual mode operation perform the
preliminary procedures in paragraph 3-34, and connect the signal to
be measured to the 5355A. Perform steps 1 through 3 for manual
mode. Perform steps 4 through 6 for offset mode of operation.
PROCEDURE
RESULTS
FOR MANUAL MODE:
To set the last
measurement as a
manual center
Key LED illuminates; 53^SA displays any previously entered manual center
frequency or the tow frequency fllsted in paragraph 3-17).
frequency press
Simultaneously press
Sets the mariuM cehtef ft^Uepcy determined by the last measurement.
/Key'LEl>;'extingulshesy''53A5A';d|spia^'\|npu|,tFequertcy.';'
■
; .entry''mode,/
, _Key,T€p-'i'tefttthat€S.,;;SM5,A''djs'i|tay|>ihput''-fye£iudq€y1o,man^
to enter the manual .
■ ' mode.
FOR OFFSET MODE:
To automatically store
the last rrteasurement
as a negative offset.
Key LED illummates. 5345A displays any previously entered offset or -1. GHz.
press: | * |
Simultaneously press:
5345A displays the la^ measureinent as a negative offset.
IQs/
Qs/
Key LED extinguishes. 5345A displays input frequency.
to exit the offset mode.
f ' ft qfiit:
Press
5345,A displays the drift of the input frequency.
to enter offset mode.
3-17
Advertisement
Table of Contents
