Could X7 Be Used With Fiio's Docking Station; The X7 Does Not Get Detected By My Computer For File Transfers; How To Connect The X7'S Coaxial/Optical Digital Output To Other Equipment? What To Connect It To; Why Does My Ht Receiver Never Play The First Ten Seconds Of Music From My X7 - Fiio X7 Mark II User Manual

headphones are not meant to be connected to a line output and will perform poorly.

Could X7 be used with FiiO's docking station?

A: X7 could be used with FiiO's docking station DK1 and desktop amplifier K5 via Micro USB
connection.

The X7 does not get detected by my computer for file transfers?

A: The X7 may be connected to the computer as a standard USB storage device or as a DAC (for
outputting audio being played by the computer). Disconnect the X7's USB connection, pull down
the settings menu from the top of the touchscreen and check that the USB connection is set to
"storage" rather than "DAC"; then plug the X7 back in. You will be prompted to "Turn on USB
storage". (the prompt can also be brought up manually by pulling down the notifications panel
from the upper left of the touchscreen and tapping the "USB connected" notification.)
How to connect the X7's Coaxial/Optical digital output to other equipment? What to connect it
to?
A: First, make sure that the Multifunctional Output is set to Coaxial or Optical digital out. Then
connect the LINE/COAX/OPT OUT port on top of the X7 to the provided S/PDIF adapter cable. Then
connect the other end of the adapter cable to your equipment's Coaxial or Optical input with an
appropriate RCA coaxial cable or Optical cable.
Note: Different manufacturers may have different pin-out definition of the coaxial cable plug. Please use the
coaxial cable supplied with the X7 to avoid the no output problem resulting from incompatibility.

Why does my HT receiver never play the first ten seconds of music from my X7?

A: If the HT receiver is not explicitly set to receive audio from the coaxial port, it takes
approximately ten seconds to detect that audio is not coming in through the HDMI port and
switch to the coaxial port. In this case, please set the HT receiver's audio input to Coaxial.
7. Other operations

How to get longer battery life for the X7?

A: a) Set the display to sleep after a certain period of inactivity (system Settings->Display-
>Sleep), and lock the screen before putting the X7 in your pocket, so that the touchscreen does
36