Page 1
English ----------------------------------- 01-03 Français ----------------------------------- 04-06 Thank you for choosing this AMADA product! At AMADA we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.
Page 2
• Check package contents against supplied parts and hardware list to ensure that all components were received undamaged. DO NOT use damaged or defective parts. lf you require replacement parts, please contact AMADA customer service at support@amadahome.com. • Carefully read all instructions before attempting installation. If you DO NOT under- stand the instructions or have any concerns or questions, please contact customer service at support@amadahome.com.
Page 3
Step 1A For Wood Stud WARNING: For wood stud mounting, wall [NOT Included] anchors [F] and [G] are NOT necessary. [Needed for Wood Stud] 2”(50mm) ø5/64”(2mm) For Long Lag Screw Step 1B For Drywall Pencil (NOT lncluded) Phillips Screwdriver (NOT lncluded)
Page 4
Step 1C For Solid Concrete and Concrete Block Walls 1 3/8”(35mm) 1/4”(6mm) Step 2 Secure the Boards onto the Brackets...
Page 5
été reçus sans dommage. N'utilisez pas de pièces endommagées ou défectueuses. Si vous avez besoin de pièces de rechange, veuillez contacter le service clientèle d'Amada au support@amadahome.com. • Lisez attentivement toutes les instructions avant de tenter l'installation. Si vous ne comprenez pas les instructions ou si vous avez des préoccupations ou des questions,...
Page 6
Étape 1A Pour les montants en bois ATTENTION: Pour un montage sur des montants [Non Inclus] [Optionnel] en bois, les ancres de murs [F] et [G] ne sont pas nécessaires. 2pouce(50mm) ø5/64pouce(2mm) Pour longue tire-fond Étape 1B Pour les cloisons sèches Crayon (pas compris) Tournevis...
Page 7
Étape 1C Pour les murs en béton massif et en blocs de béton 1 3/8pouce(35mm) 1/4pouce(6mm) Étape 2 Fixez les planches dans les supports...
Page 8
Merci d'avoir choisi ce produit AMADA! All of us at AMADA do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.
Need help?
Do you have a question about the AMFS07 and is the answer not in the manual?
Questions and answers