Table of Contents
Advertisement
Connecting Other Equipment
You can connect optional audio/video equipment to this TV
such as VCRs, video disc players, cameras or stereo systems.
Connector
Acceptable
Available
input signal
output signal
441 LL
Audio/video
Audio/video signal
(AV1/RGB)
and RGB signal | from TV Tuner
©)2/-222 |GI[H] | Audio/video
No outputs
(AV2)
signal
©2HE92
[GILL]
| Audio/S video
| No outputs
(YC2)
signal
To watch a video input picture, press -@)
until the
desired video input appears.
To return to the normal TV picture, press -@) [2]
repeatedly or press
C) [3].
Note: If you have a decoder, connect it to-44)1 Ul.
Connecting a VCR Using the TV Aerial
Terminal
Connect the aerial output of the VCR to the aerial terminal
of the TV. It is recommended to tune in the VCR signal
to programme number "0". For details, see "Tuning in to
Channels Manually" on page 6.
Note: S video input (Y/C input) [1]
Video signals may be separated into Y (luminance or
brightness) and C (chrominance) signals.
Separating the Y and C signals prevents them from inter-
fering with each other and therefore improves the picture
quality (especially luminance). This TV is equipped with 1
video input terminal through which these signals can be
input directly.
Remote Control of Other Sony
Equipment
You can use the TV Remote Commander to control most
Sony remote-controlled video equipment such as: Beta,
8mm or VHS VCRs or video disc players.
Tuning the Remote Commander to the
equipment
1 Set the VTR 1/2/3 MDP selector 20 according to the
equipment you want to control:
VTR 1: Beta VCR
VTR 2: 8mm VCR
VTR 3: VHS VCR
MDP: Video Disc Player
2 Use the buttons [21] to operate the additional
equipment.
ae, eee
Note: If your video equipment is furnished with a
COMMAND MODE selector: set this selector to the same
position as the VTR 1/2/3 MDP selector on the TV Remote
Commander.
Note: If the equipment does not have a certain function, the
corresponding button on the Remote Commander will not
operate.
Note: When you use the @ (record) button, make sure to
press this button and the one to the right of it
simultaneously.
Using Headphones
You can utilise headphones. Connect them to the
headphone jack [J], then the sound from the speaker goes
off.
17
Advertisement
Table of Contents
