Table of Contents
Advertisement
SECTION
1
The operating instructions mentioned here are partial abstracts from
the Operating
Instruction
Manual.
The
page
numbers
of the
G EN E RAL
Operating Instruction Manual remain as in the manual.
Press one of the colour buttons [17 on the Remote
Commander to select a language (Press the white
button [17| to display other language alternatives).
The SELECT LANGUAGE screen clears and all subse-
quent menus appear in the chosen language.
Inserting the Battery Into the
SELECT LANGUAGE
Remote Commander
@ ENGLISH
@ DEUTSCH
@ FRANCAIS
@ ESPANOL
® MORE
SELECT COL. BUTTON
Note: From the second time when you turn on the TV, the
MENU screen appears instead of the SELECT LANGUAGE
screen. Press the yellow button [17] then press the white
button [17] to redisplay the SELECT LANGUAGE screen.
Tuning in to Channels
A. On the TV: hold down ®1] [E] on the front of the
TV for 2 seconds
(All receivable channels are tuned in
the order noted below).
or
B. On the Remote Commander: as follows
in
=
tO
1 Press MENU
[7}.
2 Press the yellow button (17).
Choosing
a Language
3 Hold down the red button [17|for 2 seconds,
(See inside of front cover and back cover)
Note: Press the green button [17] to cancel.
1 Depress © [A] on the Tv.
The TV turns on. If the standby indicator |B on the TV
Channels are automatically stored as follows:
¢ If you connect a VCR via the aerial cable, set the VCR to its
test signal or play mode before auto-tuning.
* You may have to exchange the programme positions, if
—6—
there are duplicated signals from local transmitters .
Advertisement
Table of Contents
