Advertisement
Speaker cables
@ Twist the wire.
@ Push down on the lever, insert the bare ends of the wires, and
push up the lever. (Refer to the right)
Note:
¢Make sure the bare ends of the wires are not unraveled. (If they
are, twist them tight again.)
fx fc
damaged
if they are shorted.)
Speaker
First connect the cables to the speakers, then to the
amplifier.
Speaker cable
(included)
Speaker
Amplifier
Notice for speaker connections:
Connect
each
color coded
wire of the speaker
cable to the
corresponding
color coded terminal according to the following
chart.
Polarity
l
High tone
|
[Lowtone
|| Black
@ DAT (digital audio tape deck)
DAT
INPUT
OUTPUT
Stereo
pin cord
Amplifier
[
REC OUT
PLAY BACK
et ee
@ PHONO
(turntable system)
Turntabl
OUTPUT
seein
Stereo
————_.
i
pin cord
Amplifier
B "GND" terminal
This terminal is for use with turntables which have a ground wire.
Advertisement
