Specification; Charging; Operation; Battery Removal - Sealey LED307.V2 Manual

3. SPECIFICATION

Model No: ...................................................... LED307.V2
Battery: ......................................... 3.7V 1.5Ah Lithium-ion
LED Type ......................................2.5W+ 0.5W SMD LED
Lumen Output: ...................................Side/Top: 180/50 lm
Operating Time: ..................................... Side/Top 16/3 hr
Charging Time: ...........................................................5hrs
Length: ..................................................................210mm

4. CHARGING

Note: Fully charge the lamp before first use.
4.1. Connect the charger into the charging port (Fig.1) on the bottom of the lamp.
Plug into power supply and turn on, the charging LED (Fig.1) will light RED
to show charging has commenced.
4.2. When the battery is nearly fully charged the LED will change to ORANGE.
4.3. When the battery has fully charged the LED will

5. OPERATION

5.1. Direct the lens away from your eyes before switching on. Their are two buttons
in the switch the top button with an upward facing arrow turns on the 7 LED
array on the top of the lamp. The downward facing arrow turns on the 24 SMD
array. See Fig.1.
5.2. Suspend the lamp by the hanging hook. When the lamp is hanging from the
hook it can be rotated through 360° for more precise positioning.
5.3. Alternatively use the integral magnet on the rear of the lamp (Fig.2) to attach to
any ferrous surface
5.4. Keep the inspection lamp free from dirt and grease, use a damp cloth and a
mild detergent. DO NOT submerge the lamp in water or subject it to any
acids or detergent that may degrade the materials of the lamp's construction.
fig.2
1. Rotating Hook
2. Magnet
3. Screws

BATTERY REMOVAL

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of
products containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance
scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact
your local solid waste authority for recycling information.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. Please note that other versions of this product are available. If you require documentation for
alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
change to GREEN.
01284 703534 sales@sealey.co.uk
Original Language Version
fig.1
1. 7 LED On/Off
2. 24 SMD On/Off
www.sealey.co.uk
LED307.V2 Issue 4 (H,2,F) 16/08/22
REGISTER YOUR
PURCHASE HERE