Bang & Olufsen Beogram CD 5500 Service Manual page 32

Bang & Olufsen
ADSKILLELSE
Transportsikring
For brug fjernes de te transportskruer i bunden, og
placeres som beskrevet pa bunden.
Kabinet
6-1
DISASSEMBLY
Transport protection
Before use remove the two transport screws on the ,
base and insert them as described on the base.
Cabinet
Skruerne (A) losnes, skubbes op og spandes.
Kabinettet presses ca. 1 cm. bagud, og leftes af.
PCB
Loosen, push up and tighten screws (A).
Press the cabinet approx. 1 cm to the rear and lift off.
PCB
De 5 skruer fjernes.
PCB stifles i service position som vist.
Remove the five screws.
Place the PCB in service position as shown.