Table of Contents
Advertisement
2.
Enter a phone number from standby mode. (If you make
a mistake while dialing, press
a time. Press and hold
and return to standby mode.)
3.
Press
Call Guard is enabled, highlight Roam Call and press
. See "Call Guard" on page 69.)
4.
Press
Tip:
To redial your last outgoing call, press
Tip:
When making calls off the Nationwide Sprint PCS Network, always dial
using 11 digits (1 + area code + phone number).
You can also place calls from your phone by using Sprint PCS
Voice Command (page 119), Speed Dialing numbers from
your Contacts (page 79), and using your Call History listings
(page 73).
Dialing Options
When you enter numbers in standby mode, you will see a
variety of dialing options appear as softkeys on the phone's
display screen.
To initiate an option, press the corresponding softkey button.
Call: To dial the phone number.
Call: Speaker On: To dial the phone number in
speakerphone mode.
Save: Enter a seven- or ten-digit number (phone number
and area code) and press Options (
(
) to save the phone number in your Contacts.
(See "Saving a Phone Number" on page 28.)
P Hard Pause: To insert a hard pause.
T 2-sec Pause: To insert a two-second pause.
. (To make a call when you are roaming and
or close the phone when you are finished.
Section 2A: Your Phone-The Basics
to erase one digit at
to erase the entire number
twice.
). Select Save
23
Advertisement
Table of Contents
