Changing The Light Bulb - Electrolux SANTO Z 9 12 40-6i User Manual

What to do if...
Symptom
The compressor does not
start immediately
pressing the TURBO COOL-
MATIC or FROSTMATIC
button, or after changing
the temperature setting.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or disconnect from the
mains supply.
Light bulb data: 220-240 V,
1. To switch off, press the ON/OFF button until the mains power light
extinguishes.
2. Unplug the mains plug.
3. To change the light bulb,
rear hook and at the same time slide
the light bulb cover in the direction
indicated by the arrow.
4. Change the faulty light bulb.
5. Refit the light bulb cover.
6. Put the refrigerator back into opera-
tion.
Possible Cause
after
This is normal, no error has
occurred.
max. 25 W
press on the
Remedy
The compressor starts after
a period of time.
55