Specifications - Onkyo TX-SV515PRO / II Service Manual

TX-SV515PRO
SPECIFICATIONS
AMPLIFIER SECTION
Power Output:
Total Harmonic Distortion:
IM Distortion:
Damping Factor:
Sensitivity and Impedance:
Phono Overload:
Frequency Response:
RIAA Deviation:
Tone Control:
Signal to Noise Ratio:
Muting:
VIDEO SECTION
Front L/R channels
80 watts per channel min. RMS. at 8 ohms, both
channels driven, from 20 Hz to 20,000 Hz, with
no more than 0.08% total harmonic distortion.
Continuous Power output:
2x 115 watts 4 ohms 1 kHz DIN
2 x 90 watts 8 ohms 1 kHz DIN
Front L/R and center channels
55 watts per channel min. RMS. at 8 ohms 1,000 Hz,
with no more than 0.08% totai harmonic distortion.
Rear or Remote channels
20 watts per channel min. RMS. at 8 ohms 1,000 Hz,
with no more than 0.8% total harmonic distortion.
0.08% at rated power (FRONT)
0.08% at rated power (FRONT)
60 at 8 ohms (FRONT)
Phono: 2.5 mV/50 kohms
CD/Tape Play: 150 mV/50 kohms
Tape Rec: 150 mV/2.2 kohms
120 mV RMS. at 1,000 Hz, 0.5% THD.
20 to 30,000 Hz, +/—1 dB
20 to 20,000 Hz, +/-0.8 dB
BASS: +/-10 dB at 100 Hz
TREBLE: +/-10 dB at 10,000 Hz
PHONO: 80 dB (IHF A, 5 mV input)
CD/TAPE: 100 dB (IHF A)
~°o dB
Signal sensitivity and impedance
VDP/VCR input, output: 1 Vp-p, 75 ohms
TUNER SECTION
FM: (other models)
Tuning Range:
Usable Sensitivity:
'S$0dB'Quieting Sensitivity:
Capture Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Selectivity:
AM Suppression Ratio:
Harmonic Distortion:
Frequency Response:
Stereo Separaticn:
AM:
Tuning Range:
Usable Sensitivity:
Image Rejection Ratio:
iF Rejection Ratio:
Signai-to-Noise Ratio:
Total Harmonic Distortion:
TUNER SECTION
FM: (120V model)
Tuning Range:
Usable Sensitivity:
87.5 — 108.0 MHz (50 kHz steps)
Mono: 11.2 dBf, 1.0 V, 75 ohms
0.9 pV (S/N 26 dB, 40 kHz Devi.)
75 ohms DIN
Stereo: 18.0 dBf, 2.2 pV, 75 ohms
23 pV (S/N 46 dB, 40 kHz Devi.)
75 ohms DIN
Mono: 18.0 dBf, 2.2 V, 75 ohms
Stereo: 37.2 dBf, 20 pV, 75 ohms
50dB Quieting Sensitivity:
Capture Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
1.5 dB F
85 dB Alternate Channel Attenuation:
90 dB AM Suppression Ratio:
Mono: 73 dB Total Harmofic Distortion:
Stereo: 67 dB
- 50 dB DIN (+300 kHz, 40 kHz Devi.)
50 dB
Mono: 0.15 %
Stereo: 0.25 %
30 — 15,000 Hz +1.5 dB
45 dB at 1 kHz
Frequency Response:
Stereo Separation:
Muting Level:
GENERAL
Dimensions (W x H x D):
European models ene
522 — 1611 kHz (9 kHz steps)
USA. and Canadian models
530 — 1710 kHz (10 kHz steps)
Saudi Arabia and worldwide models
531 — 1602 kHz (9 kHz steps)
30 nV
40 dB
40 dB
40 dB
0.7%
87.5 — 108.0 MHz (50 kHz steps)
Mono: 11.2 dBf, 2.0 nV
Stereo: 17.2 dBE, 4.0 pV
Mono: 17.2 dBi, 4.0 pV
Stereo: 37.2 dBi, 40 pV
1.5dB
40 dB
90 dB
Mono: 73 dB
Stereo: 67 dB
55 dB
50 dB
Mono: 0.15%
Stereo: 0.25%
30 — 15,000 Hz +/-1.5 dB
45 dB at 1 kHz/30 dB
at 100 — 10,000 Hz
17.2 dBE, 4.0 pV
455 x 170 x 388 mm
17-15/16" x 6-11/16" x 15-5/16"
13.5 kg (29.8 Ibs)