Pre-Programmed Code Tables - Universal Remote Unifier URC-100 Owner's Manual

Pre-Programmed Code Tables

The Unifier's Pre-Programmed code library is classified
by category (TV, VCR, AUX, etc.). Each category actually
includes many types of components. For example, the
SAT category includes satellite receivers and digital video
recorders like TiVo and Replay.
Within each category, the code numbers are listed in
rows by brand (Sony, Panasonic, B & K, etc.). Some
brands have more than one three digit code for you to
try. Just circle the correct row and refer to it while you
setup (step-by-step instructions for using Pre-Programmed
codes are found on page 5).
TV TVs, Plasmas,
Projectors and Monitors
CABLE Cable TV and Web TV
DVD Players
DVD
and Laser Disc Players
VCRs and TV/VCR Combo
VCR
Amps, Preamps
AUDIO
and A/V Receivers
SAT Satellite Receivers, TiVo,
Replay and other DVR's
CD CD Players and Changers
AUX Tape Decks, Lighting Controls,
Custom Installation Products
NOTE: Following each Code Table is a Command Locator.
Use the Command Locator to locate the additional
commands that are accessed via the SHIFT button.
U R C - 1 0 0
25
Pages 38-42
Pages 45-47
Pages 32-34
Pages 42-45
Pages 26-29
Pages 36-38
Pages 29-31
Pages 34-36