Universal Remote Unifier URC-100 Owner's Manual page 14

2
The Unifier displays SET in the display.
Press the SHIFT button. The Unifier displays
3
PUNCH in the display.
Press the Volume Up button. The display confirms
4
by displaying "VOL". This sets up the group of three
buttons (Volume Up, Volume Down and Mute) in
one action!
Press the Device button for the device that has the
5
Volume control commands you want (i.e.,TV for
systems using the TV speakers, AUDIO for systems
with surround sound receivers). The bottom of the
display will flash "SAVED".
The Unifier will flash the device's name twice and
return to operating mode.
Repeat steps 1-5 until all your other devices (VCR,
6
CABLE, CD, etc.) operate the volume perfectly.
Note: The Punch Through feature is not limited to
volume and can also be applied to other groups of
buttons. If you find yourself switching to a particular
device frequently to use a group of controls, consider
using Punch Through for another group, as listed here:
VOL - Volume Up, Volume Down and Mute
CH UP- Channel Up, Channel Down and Prev. Channel
PLAY - Play, Stop, Pause, Rewind and Fast Forward
GUIDE - Guide, Menu, Info, Exit, Up, Down, Left, Right, Sel
POWER On - Power On and Power Off
T h e U n i f i e r
SET
PUNCH
VOL
12