Channel "Punch Through - Universal Remote SL-9000 Operating Manual

Advanced Features
To Return to the Original Setting:
1
Select the mode that you want to turn off the Volume
Control "Punch Through."
2
Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3
Press the VOLUME UP button. PUNCH will appear in
the LCD.
4
Press the Device Button again. The DEVICE Mode will
flash in the LCD.
The AUDIO or TV Volume Control "Punch Through" is
now turned off. The VOLUME and MUTE of the original
device will operate on the remote control.
Channel Control "Punch Through"
You can program the remote so that either the SAT or Cable
Channel Controls (CHANNEL UP and DOWN) will also
operate in other modes on the remote control.
Example: Change
cable box while the remote is in the TV mode.
Note: When this feature is active, SAT or Cable CHANNEL
UP and DOWN will override any existing channel controls in
that mode.
To Set-Up:
1
Select the mode that you wish to program for Channel
Control "Punch Through."
2
Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3
Press the VOLUME DOWN button. PUNCH will appear
in the LCD.
CHANNELS UP and DOWN on your
24
24