Main Device Mode; Automatic Audio Mode - Home Theater Master SL-8000 Operating Manual

Using Your Remote
4
Press the ENTER button. SAVE will flash twice and the
LCD will return to AUDIO indicating that the joined
function has been stored.
Every time that the
the joined function.
To erase a joined function from a Device button:
1
Press the AUDIO and ENTER buttons simultaneously on
the remote control. JOIN will appear in the LCD.
2
Press the Device button that you would like to erase a
joined function. CLEAR will flash and INPUT will then
appear in the LCD.
3
Press the ENTER button. The LCD will flash SAVE twice
and return to AUDIO indicating that the join has been
erased.

Main Device Mode

When the main device is displayed in the LCD, the
SL-8000 will perform all of the preprogrammed, joined and
punch through features for that device mode.

Automatic Audio Mode

The remote is defaulted to the Automatic Audio. When the
remote control is in this mode, pressing a Device button a
second time will display A_XXX in the LCD indicating that
the Volume and Mute controls of the device programmed
into the Audio mode of the SL-8000 is active, while full
function control of all other buttons of the current Device
mode is maintained.
Main Device Mode
Device button is pressed it will also emit
Automatic Audio Mode
15
15