Advertisement
HEWLETT AD PACKARD
MANUAL CHANGES
pm NEW OR REVISED ITEM
» ERRATA
Page vi (front matter) SAFETY
CONSIDERATIONS:
Delete the entire paragraph entitled "HIGH
VOLTAGE"
and substitute the following:
HIGH VOLTAGE
Caution — to prevent electric shock, do not remove cover.
Refer servicing to qualified personnel.
Page 1-0, Figure 1-1, Model 5328A Universal Counter with Options:
Change the marking of the 5328A front panel power switch as follows:
Change "POWER" to "LINE" and "OFF" to "STBY".
At top left side of switch insert the
word "ON''.
Make this same change to all front view photos, Figures 3-8, 3-10, 3-11, 3-12,
and 3-13.
In Figures 3-8 and 3-10, Step 1, change the first part
"'In off (up) position, ...
to read
"In STBY position,..."
."
Page 1-1, Paragraph 1-7:
Delete all of this paragraph except the first two sentences.
Add the following:
"The five-digit number is the serial number of each instrument.
A manual change sheet
Ps
Page 1-3, Paragraph 1-20:
Add the following:
"The test leads listed in Table 1-2 are used with the DVM
options.
The coax cable listed
is used with input A, B or C.
The rack flange kit is used to install the 5328A in a cabinet."
Page 1-3, Table 1-2, Accessories Available:
Change Table 1-2 as follows:
Delete all information entitied ''Rack Mount Flange' and insert the following:
male connectors, 48 inches long
PAGE
1
Advertisement
