Table of Contents
Advertisement
Connecting a 4K TV and
4K Devices
All HDMI jacks on the Sound Bar support
4K video format, HDCP2.2, and HDCP2.3
(High-bandwidth Digital Content
Protection System Revision 2.2 and 2.3).
To watch 4K video content, connect the
4K TV and 4K devices to the Sound Bar
via an HDCP2.2 or HDCP2.3-compatible
HDMI jack on each device. You can only
view 4K video content through the
HDCP2.2 or HDCP2.3-compatible HDMI
jack connection.
HDCP2.2 or HDCP2.3-
compatible HDMI jack
HDCP2.2 or HDCP2.3-
compatible HDMI jack
Blu-ray Disc player, cable
box, satellite box, etc.
16
GB
TV
HDMI cable (not supplied)
HDMI cable (not supplied)
Use an HDMI cable which supports the 4K video
format that you want to watch. For details, see
"Supported HDMI Video Formats" (page 39).
Optical digital cable (supplied)
1
Check which HDMI IN jack on your
TV is compatible with HDCP2.2 or
HDCP2.3.
Refer to the operating instructions
of the TV.
2
Connect the HDCP2.2 or HDCP2.3-
compatible HDMI IN jack on the TV
and HDMI OUT (TV eARC/ARC) jack
on the Sound Bar with an HDMI
cable (not supplied).
If the HDCP2.2 or HDCP2.3-
compatible HDMI IN jack on the TV
supports eARC or ARC, TV connection
is complete. Go to step 4.
3
The HDCP2.2 or HDCP2.3-
compatible HDMI IN jack on the TV
does not support eARC or ARC,
connect the optical digital output
jack on the TV and the TV IN (OPT)
jack on the Sound Bar with the
optical digital cable (supplied).
When connecting the TV and Sound
Bar with an HDMI cable (not
supplied) only, the TV sound is not
output from the Sound Bar. Connect
the optical digital cable (supplied).
TV connection is complete.
4
Connect the HDCP2.2 or HDCP2.3-
compatible HDMI OUT jack of the
4K device and HDMI IN jack of the
Sound Bar with an HDMI cable
(not supplied).
Refer to the operating instructions of
the 4K device to check that the HDMI
OUT jack of the 4K device is
compatible with HDCP2.2 or HDCP2.3.
4K device connection is complete.
5
Insert batteries into the remote
control.
Advertisement
Table of Contents
