Advertisement
Quick Links
Advertisement
Related Manuals for Hyundai Robex 160LC-9A
Summary of Contents for Hyundai Robex 160LC-9A
- Page 1 Robex 160LC-9A CRAWLER EXCAVATOR OPERATOR'S MANUAL...
- Page 2 TABLE OF CONTENT CONTENTS FOREWORD BEFORE SERVICING THIS MACHINE EC REGULATION APPROVED TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR SAFETY LABELS MACHINE DATA PLATE GUIDE SAFETY HINTS 1. BEFORE OPERATING THE MACHINE 2. DURING OPERATING THE MACHINE 3. DURING MAINTENANCE 4.
- Page 3 10. ATTACHMENT LOWERING (when engine is stopped) 11. STORAGE 12. RCV LEVER OPERATING PATTERN 13. SWITCHING HYDRAULIC ATTACHMENT CIRCUIT TRANSPORTATION 1. PREPARATION FOR TRANSPORTATION 2. DIMENSION AND WEIGHT 3. LOADING THE MACHINE 4. FIXING THE MACHINE 5. LOADING AND UNLOADING BY CRANE MAINTENANCE 1.
- Page 4 CONTENTS Foreword ----------------------------------------------------------- 0-1 7. Efficient working method ---------------------------- 4-16 Before servicing this machine --------------------------- 0-2 8. Operation in the special work sites ------------ 4-20 EC regulation approved ------------------------------------ 0-3 9. Normal operation of excavator ------------------- 4-22 Table to enter S/No and distribution --------------------- 0-4 10.
- Page 5 3. Use genuine Hyundai spare parts genuine Hyundai spare parts for the replacement of parts. We expressly point out that Hyundai will not accept any responsibility for defects resulting from non- genuine parts or non workmanlike repair. In such cases Hyundai cannot assume liability for any damage.
- Page 6 The procedures in this manual do not supersede any requirements imposed by federal, state, provin- cial or local laws. Hyundai can not anticipate every possible circumstance or environment in which this machine may be used and serviced. All personnel must remain alert to potential hazards.
- Page 7 EC REGULATION APPROVED EC REGULATION APPROVED · Noise level (EN474-1 : 2006 and 2000/14/EC) are as followings. : 101 dB (EU only) 70 dB · The value of vibrations transmitted by the operator's seat are lower than standard value of (EN474-1 : 2006 and 2002/44/EC) Find manuals at https://best-manuals.com...
- Page 8 Model : ******* Serial Nr. : 2. Manufacturer HYUNDAI CONSTRUCTION EQUIPMENT CO., LTD. 12th Fl., Hyundai Bldg. 75, Yulgok-ro, Jongno-gu, Seoul 03058, Korea HYUNDAI CONSTRUCTION EQUIPMENT EUROPE N.V. Authorized representative : Hyundailaan 4, 3980 Tessenderlo Owner of the technical fi le for Belgium machine production.
- Page 9 TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR Machine Serial No. Engine Serial No. Manufacturing year Manufacturer HYUNDAI CONSTRUCTION EQUIPMENT CO., LTD. 12th Fl., Hyundai Bldg. 75, Yulgok-ro, Jongno-gu, Address Seoul 03058, Korea HYUNDAI CONSTRUCTION EQUIPMENT U.S.A, Inc. Distributor for U.S.A 6100 Atlantic Boulevard Norcross...
- Page 10 SAFETY LABELS SAFETY LABELS 1. LOCATION 1. LOCATION Always keep these labels clean. If they are lost or damage, attach them again or replace them with a new label. PUMP SCREEN CAB INSIDE-RH CAB INSIDE-LH LH CONSOLE BOX BATTERY COVER SCREEN PLATE 1609A0SL01 Air cleaner filter...
- Page 11 2. DESCRIPTION 2. DESCRIPTION There are several specific warning labels on this machine please become familiarized with all warn- ing labels. Replace any safety label that is damaged, or missing. AIR CLEANER FILTER AIR CLEANER FILTER (item 1) This warning label is positioned on the air cleaner cover.
- Page 12 BATTERY ACCIDENT BATTERY ACCIDENT (item 5) This warning label is positioned on the bat- tery cover. Electrolyte containing sulfuric acid cause Electrolyte containing sulfuric acid cause severe burns. Avoid being in contact with severe burns. Avoid being in contact with skin, eyes or clothes.
- Page 13 7) 7) HYDRAULIC OIL LEVEL HYDRAULIC OIL LEVEL (item 7) This warning label is positioned on the screen plate. Place the bucket on the ground whenever Place the bucket on the ground whenever servicing the hydraulic system. servicing the hydraulic system. ※...
- Page 14 KEEP CLEAR-SIDE KEEP CLEAR-SIDE (item 13) This warning label is positioned on the side of LH rear side cover. To prevent serious personal injury or To prevent serious personal injury or death keep clear of machine swing radi- death keep clear of machine swing radi- Do not deface or remove this label from Do not deface or remove this label from the machine.
- Page 15 NO STEP NO STEP (item 16) This warning label is positioned on the engine hood and counterweight. Do not step on the engine hood and Do not step on the engine hood and counterweight. counterweight. 21070FW16 TRANSPORTING TRANSPORTING (item 17) This warning label is positioned right side of upper frame.
- Page 16 REF OPERATOR'S MANUAL REF OPERATOR'S MANUAL (item 20) This warning label is positioned on the right side window of the cab. (1) (1) REF OPERATOR MANUAL REF OPERATOR MANUAL Study the operator's manual before start- Study the operator's manual before start- ing and operating machine.
- Page 17 19 19) SAFETY REAR WINDOW SAFETY REAR WINDOW (item 23) This warning label is positioned on the inside of rear window. ※ The rear window serves us an alternate The rear window serves us an alternate exit. exit. ※ To remove rear window, pull the ring and To remove rear window, pull the ring and push out the glass.
- Page 18 CLAMP LOCKING CLAMP LOCKING (item 32) This warning label is positioned on the right side window of cab. Serious injury or death can result from Serious injury or death can result from dropping bucket. dropping bucket. Operating the machine with quick clamp Operating the machine with quick clamp switch unlocked or without safety pin of switch unlocked or without safety pin of...
- Page 19 FALLING FALLING (item 39) This warning label is positioned on the top of the hydraulic tank. Falling is one of the major cause of per- Falling is one of the major cause of per- sonal injury. sonal injury. Be careful of slippery conditions on the Be careful of slippery conditions on the platforms, steps and handrails when platforms, steps and handrails when...
- Page 20 A special air bleed valve is nec- mulator. A special air bleed valve is nec- essary for this operation, so please con- essary for this operation, so please con- tact your Hyundai distributor. tact your Hyundai distributor. MACHINE CONTROL CABIN MACHINE CONTROL CABIN (item 44) This warning label is positioned on the right side window of the cab.
- Page 21 MACHINE CONTROL PATTERN MACHINE CONTROL PATTERN (item 46) This warning label is positioned on the LH support of cowl. Check the machine control pattern for Check the machine control pattern for conformance to pattern on this label. conformance to pattern on this label. not, change label to match pattern before not, change label to match pattern before operating machine.
- Page 22 BEACON LAMP BEACON LAMP (item 49) This warning label is positioned on the right outside of the cabin. ※ Make sure the beacon lamp maintains a Make sure the beacon lamp maintains a vertical position. vertical position. A horizontal position can result in a A horizontal position can result in a decrease in life time of the lamp due to decrease in life time of the lamp due to...
- Page 23 CONTROL IDEOGRAM-DOZER (item 54) This warning label is positioned on the LH console box. See page 4-12 for details. Guidlines for using the general dozer blade. Be careful not to apply an excessive load when using a blade. R25Z9A0FW06 Avoid impacts and loads on the bot- tom due to machine modification or excessive working conditions.
- Page 24 ※ The machine serial number assigned to this particular machine and should be used when request- ing information or ordering service parts for this machine from your authorized HYUNDAI dealer. The machine serial number is also stamped on the frame.
- Page 25 GUIDE GUIDE 1. DIRECTION 1. DIRECTION Forward The direction of this manual indicate forward, back- ward, right and left on the standard of operator when the travel motor is in the rear and machine is on the traveling direction. Left Right Travel motor Backward...
- Page 26 SAFETY HINTS 1. BEFORE OPERATING THE MACHINE Think-safety first. In special situation, wear protective clothing including a safety helmet, safety shoes, gloves, safety glasses and ear protection as required by the job condition. Almost every accident is caused by disregarding the simple and fundamental safety hints.
- Page 27 Check daily according to the operation manual. Repair the damaged parts and tighten the loosened bolts. 13031SH05 Check for leakage of engine oil, hydraulic oil, fuel and coolant. Keep machine clean, clean machine regularly. 13031SH06 Do not operate the machine if it requires repairs. Operate after complete repair.
- Page 28 In case you need top guard, front guard and FOPS (falling object protective structure), Front guard please contact Hyundai distributor in Europe. 21091SH01 UNAUTHORIZED MODIFICATION Any modification made without authorization from Hyundai can create hazards.
- Page 29 Do not use attachments that are not authorized by Hyundai or your Hyundai distributor. Use of unauthorized attachments could create a safety problem and adversely affect the proper opera- tion and useful life of the machine.
- Page 30 SAFETY FEATURES Be sure all guards and covers are in their proper position. Have guards and covers repaired if damaged. Use safety features such as safety lock and seat belts properly. Never remove any safety features. Always keep them in good operating condition. Improper use of safety features could result in serious bodily injury or death.
- Page 31 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...