Cleaning And Maintenance - UFESA Nevada Instruction Manual

MODE Button (C):
- When you press the On/Off button once, the fan will operate in Normal mode.
- Press mode button one time to change to Natural mode: the unit simulates a natural
breeze mode and the related indicator light (3) will be on.
- Press mode button another time to change to Sleeping mode: the unit simulates a soft
breeze suitable for night time use. The related indicator light (3) will be on.
- Press again mode button to change to Normal mode..
TIMER Button (D):
- When the unit is operating, you can set the timer to switch the fan off automatically after
the set time.
- Press the timer button repeatedly to select the desired time period in half hours incre-
ments: 30 min, 1h, 1h30 ....7h30.
- The related indicator light (1) will illuminate on the control panel. When all the light are
off means that time is not set and the unit will continuously work until you switch off ma-
nually the unit.
OSCILLATION Button (E):
- Press the oscillation button to activate the automatic oscillation from right to left. The
related indicator light (4) will illuminate in the control panel.
- Press again the oscillation button to deactivate the automatic oscillation; the indicator
light (4) will off on the control panel.
MIST Button (F):
- Put some water into the water tank (15), and tighten up the lock nut. And put it back onto
the fan.
- When the mist function is selected the water indicator (17) light on in blue color.
- If the water tank (15) is empty, the indicator light will be light on in red color.
Note: The mist function and speed function can be worked independent, or together.

CLEANING AND MAINTENANCE

Warning: before carrying out the normal cleaning operations, remove the plug from the
mains socket.
To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive
products. Do not immerse any part of the mist fan in water or any other liquid: if this ha-
ppens, do not immerse your hand in the liquid and, first of all, remove the plug from the
mains socket. Carefully dry the device and check that all the electrical parts are dry as
well: if in doubt, contact a qualified technician. Remove the water tank and clean it with
lukewarm water; before replace the water tank in the unit make sure it is completely dry.
It is essential to keep the ventilation holes of the motor free of dust and fluff. In case of
long periods of non-use store the mist fan, protecting it from dust and moisture; we re-
commend using the original packaging. If you decide to stop using the appliance, it is advi-
sable to render it un- operational by cutting the power cable (first ensuring that the plug
has been disconnected from the mains socket) and making sure that parts which could be
dangerous to children (e.g. the blade) may cause no harm.
20