Advertisement
Available languages
Available languages
eo
odo
ot)
e660
6 OO
Cassette Holder
Tape counter and reset button
[tape counter - reset]
When
this button is pressed, the indication of the tape
counter will change to ''000". The indication changes as the
tape moves.
It is convenient during playback if a notation of the tape
counter reading is made when a new recording is made.
Recording Indicator [rec]
Level meters
These meters indicate the input level (during recording) and
the recorded level of the tape (during playback).
Input level control [input level]
Balance control [balance (left - center + right)]
Before making a recording, adjust the recording level ba-
lance of the left channel and right channel.
(This adjustment has no effect during playback.)
Eject button [eject (4)]
Play button [play-1 (> )]
Press to begin playback.
Stop button [stop ()]
Rewind/Review button [rew/rev [<4)]
Fast Forward/Cue button [ff/cue(>>)]
Pause button [pause (11)]
Press this button to temporarily stop the tape during record-
ing or playback.
®
Tape select buttons
[tape select (Normai- CrO:- Metal)]}
In order to get the best performance from tape, and to
record and playback with little distortion, the Tape selector
should be set.
Examples of tape commercially availabie
_ Tape
|
Selector:
|
=
Technics
XD
iN
BASF
LHI
PROFESSIONAL
I
SLH
MAXELL
UD
UDXLI
FUJl
FXI
SONY
AHF
TDK
AD
Technics
XA
MAXELL
UDXLID)
SCOTCH
MASTER TI
FUJI
FX
TOK
SA
Technics
MX
MAXELL
MX
SCOTCH
METAFINE
FUJ!
SR
SONY
METALLIC
TOK
MA
Normal
CrO2
Metal
eNote that there may be a difference in sensitivity of 2 or 3
dB, depending on the type of tape.
Do not use tape such as described
below in this unit.
Fe-Cr tape
The high range will be emphasized, and a flat frequency
response characteristic cannot be otained.
Advertisement
