Philips LivingColors Micro 70018/30/PH User Manual

Unpacking and Installing

If you unpack a LivingColors, you only need to plug the cable into the back of the product, connect it to the power system and start the

experience!

Step 1:

Place your LivingColors in a selected location on a flat and stable surface and direct it to the wall.

Step 2:

Plug the cable into the back of the product.

Step 3:

Plug your LivingColors into the power system.

Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per

Micro 70018/30/PH lampada da tavolo LED touch

Illuminazione per Interni

User Manual LivingColors Micro

Getting started with your LivingColors

o cerca il tuo prodotto tra le

Philips Livingcolors

migliori offerte di

Table of Contents

Do you have a question about the LivingColors Micro 70018/30/PH and is the answer not in the manual?

Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Philips Livingcolors Micro 70018/30/PH lampada da tavolo LED touch o cerca il tuo prodotto tra le migliori offerte di Illuminazione per Interni User Manual LivingColors Micro Getting started with your LivingColors...
Page 2 Basic functionality Turn the LivingColors “On” or “Off”: Your LivingColors can be turned “On” and “Off ” by using the “I/0”-button on the back of the product or even by just selecting a colour on the colour strip. If you turn the LivingColors “Off ”, it will remember your last setting for the next time you use it. Colour selection: To let your LivingColors change to whatever colour you like, simply select the colour on the colour strip by touching it.
Page 3 To exit the Automatic Colour Change Mode, simply use the “I/0”-button to turn the product off and select a colour to turn it back on. The Automatic Colour Change Mode is now stopped. Problem solving Reset the luminaire by unplugging it from the power network. Wait for 30 sec and plug it back in.